Rapid MONTA M 141 Betriebsanleitung Seite 301

Supplemental directives
These instructions enable the safe and efficient
handling of the single-axle walk-behind tractor
Rapid MONTA M 141 / M 161 Typ 1680 (herein-
after referred to as the "machine"). The instruc-
tions are part of the machine and must be stored
in a place accessible to the user where the
machine is stored.
The user must have carefully read through and
understood these instructions before beginning
any work. The basic pre-requisite for safe work is
compliance with all specified safety notices and
instructions in these operating instructions. Fur-
thermore, the local accident prevention regula-
tions and general safety regulations for the range
of application of the machine also apply.
Figures in these instructions are intended to aid
general understanding and may differ from the
actual design.
Any other kinds of use shall be deemed to be not
in accordance with the specified use. The manu-
facturer cannot be held liable for any damage
resulting from such use. The risk in such cases
shall be borne solely by the user.
Copyright protection
These instructions are protected by copyright.
Except for internal purposes, the loaning of these
instructions to third parties, any and all types of
duplication – even of excerpts – and the use
and/or communication of the contents are not
permitted without the written consent of Rapid
Technic AG (hereinafter referred to as the "manu-
facturer"). Infringements will make the user liable
to pay damage compensation. The manufacturer
reserves the right to assert additional claims.
The manufacturer holds the copyright.
© Rapid Technic AG
Industriestrasse 7
8956 Killwangen
SWITZERLAND
20.04.2018 Single-axle walk-behind tractor Rapid MONTA M 141/M 161 3