SATA spray master RP Betriebsanleitung Seite 500

SATA spray master RPOperating Instructions
Content [Original Version: German]
1. General Information .............519
2. Safety Instructions ...............521
3. Intended Use .......................523
4. Description ..........................523
5. Scope of Delivery ................523
6. Technical Design .................524
7. Technical Data .....................524
8. Operation .............................524
9. Maintenance and Repair .....528
Before commissioning and using the device for the first time, read these
operating instructions thoroughly and carefully. Always observe safety
precautions and hazard warnings!
Always keep these operating instructions and the spray gun operating
instructions with the product or somewhere accessible at any time to any-
one.
1. General Information
1.1. Introduction
These operating instructions contain important information for operation
of the SATA spray master RP, hereinafter referred to as a paint spray gun.
These operating instructions also include information on setup, mainte-
nance, repair, care, storage and troubleshooting.
1.2. Target group
These operating instructions are intended for
■ Skilled personnel in the painting trade.
■ Personnel trained for painting work in industrial and trade shops.
1.3. Accident prevention
Always observe the general as well as specific national accident preven-
tion regulations and corresponding workplace and plant safety instruc-
tions.
Read first!
10. Care and Storage ................531
11. Troubleshooting ...................532
12. Disposal ...............................534
13. After Sale Service ................534
14. Accessories .........................534
15. Spare Parts .........................535
16. EU Declaration of
Conformity ...........................536
US
519