Intended Use; Description; Scope Of Delivery - SATA spray master RP Betriebsanleitung

SATA spray master RPOperating Instructions
or lye.
■ Never use halogenated hydrocarbon based cleaning media.
Operating site
■ Always keep the paint spray gun away from ignition sources, such as
open flames, burning cigarettes or equipment that is not explosion
proof.
■ Use paint spray gun only in well ventilated areas.
General
■ Never point the paint spray gun at animals (including humans).
■ Comply with local regulations concerning safety, accident prevention,
occupational safety and environmental protection.
■ Observe accident prevention regulations.

3. Intended Use

The paint spray gun is used to apply paints and lacquers as well as stains
and varnishes on suitable substrates, depending on the nozzle size up to
a maximum viscosity of approx. 150 sec. in a DIN 4 mm flow cup.

4. Description

The compressed air required for painting is fed to the compressed air
connection. Squeezing the trigger as far as the first pressure point acti-
vates pre-air control. When the trigger is squeezed further, the paint nee-
dle is pulled out of the paint nozzle. The spraying medium then flows out
of the paint nozzle and is atomized by the compressed air flowing from
the air nozzle.

5. Scope of Delivery

■ Paint spray guns with RP nozzle set and aluminum gravity flow cup with
air adjustment unit and pressure gauge (0 – 1.6 bar)
■ Safety valve
■ Air hose for pressurized cup
■ Tool kit
■ Operating Instructions
After unpacking check whether:
■ Paint spray gun damaged
■ Complete scope of delivery
US
523