General Information - SATA spray master RP Betriebsanleitung

Operating Instructions SATA spray master RP
Contents [Original Version: German]
1.

General information .............123

2. Safety Instructions ...............125
3. Intended Use .......................127
4. Description ..........................127
5. Scope of Delivery ................127
6. Technical Design .................128
7. Technical Data .....................128
8. Operation .............................128
9. Maintenance and repairs .....132
Read these operating instructions thoroughly and carefully before com-
missioning and use. Comply with the safety instructions and danger
warnings!
Always make sure that these operating instructions and the operating in-
structions for the spray gun are kept with the product or keep them easily
accessible for everyone at any time!
1. General information
1.1. Introduction
These operating instructions contain important information for operating
the SATA spray master RP, referred to hereinafter as spray gun. They also
describe commissioning, maintenance and servicing, care and storage as
well as troubleshooting.
1.2. Target group
This operating manual is intended for
■ Painting and varnishing professionals.
■ Trained personnel for varnishing work in industrial and craftman's work-
shops.
1.3. Accident prevention
As a basic principle, the general and specific national accident prevention
regulations must be heeded, together with corresponding workshop and
industrial safety instructions.
Read first!
10. Care and storage .................135
11. Malfunctions ........................136
12. Disposal ...............................138
13. After Sales Service ..............138
14. Accessories .........................138
15. Spare Parts .........................139
16. EU Declaration of
Conformity ...........................140
EN
123