Manual Test Photos; Managing Your Photo Library - SecaCam pro Bedienungsanleitung

6. Manual Test Photos & 7. Photo library

6. Manual Test Photos

To manually adjust the capturing area and the photo quality, you can take a
test photo:
1. SETUP: Switch the camera to the SETUP option. Once the monitor
is on and the start-up screen has fi nished, you can see the photo
preview. Here you can see the area your camera is monitoring.
2. OK = Aufnahme:
Note: Depending on the „mode" setting either a photo or a video is recorded.
In the video mode the recording is stopped after 15 seconds.

7. Managing your photo library

1.
SETUP:
turn on and show you the image preview. In the top right corner of
the screen, it also displays the number of photos taken, and the
number of photos that can still fi t on the memory card.
Example: 6723/3375 (6.723 Photos, remaining capacity for ca.
3.375 photos)
2. PLAY:
photos. It will display the most recently taken photo
3. Right arrow = forward, Left Arrow = backward:
the right arrow keys, you can navigate through your photo library.
You can distinguish video fi les by their distinctive black bars on the
top and bottom of the image. To play a video, press the OK button.
Deleting Photos: If you want to delete a photo, you will need to go to review
mode. Once you have located the photo, press the MENU button and you will
be presented with either the option to 'format' or 'delete'. When you choose
the 'delete' option, you are then presented with the option to delete 'one'
or 'all' photos. You will then be prompted if you are sure you want to delete
the photos. Click the OK button when you have selected the 'Yes' option to
delete the photo.
Caution: The confi rmation of „all" will irretrievably delete all existing recordings
on the memory card!
Press "OK" to take a photo or a video manually.
Switch the camera to the SETUP option – The monitor will
When you hit the PLAY button, you can review your
With the left and
51