Settings - SecaCam pro Bedienungsanleitung

4.2 Settings

Before using the camera, you should adjust the settings according to your
requirements. In this chapter we explain all menu options and their possible
settings.
1. SETUP: Switch the slider to the SETUP position - The camera is
now turned on. The display turns on and shows the memory card
capacity and the remaining memory available for about 2 seconds.
2. MENU: Press the MENU button to access the camera settings
menu. In order to access the menu, the ON/SETUP/OFF switch
needs to be in the SETUP position, and then you press the MENU
button.
to the required menu item. Press "OK" to edit the highlighted menu
item. To leave the menu, press the MENU button. To turn off the
monitor and begin the surveillance function, switch the camera into
the ON position. As soon as the LED light stops blinking, the came-
ra will start taking photos.
3. To turn off the camera LCD display and start its surveillance
ON:
function, move the ON/SETUP/OFF switch to the ON position. As
soon as the LEDs are no longer illuminated, the camera will begin
operation.
44
3
1
Use the "Arrow up" and "Arrow down" buttons to navigate
4. Operation
2