Sensitivity; Night Mode; Time Lapse - SecaCam pro Bedienungsanleitung

5. Menu
We recommend a video length of 15 seconds. When using the mode
„Photo+Video" we recommended to reduce the video length to 10 seconds.
Memory Info: In daylight a 15 second video in "HD" video size takes up rough-
ly 60 MB of memory space. A 8GB memory card will hold approx. 130 short
videos.
5.6

Sensitivity

The SECACAM Pro uses a „passive infrared sensor" (PIR) which reacts to
moving heat sources. The sensitivity of the sensor can be set between "High",
"Middle" and "Low".
We recommend the „High" setting. However, this setting increases the pos-
sibility of false triggering, for example when the camera recognizes moving
branches that have been warmed by sunlight and are now moving in the
wind. If too many false triggered photos are recorded, the sensitivity may be
reduced step-by-step.

5.7 Night Mode

On the SECACAM Pro you can choose between 3 options for exposure:
Max. Range: Exposure time is optimized for max. range. The focus lies on a
well exposed scenery. Quick moving animals or other objects that are
not standing still might appear less sharp, though.
Balanced: Exposure time is a balanced compromise between max. range and
min. blur. Moving animals are rendered rather sharp while the whole
scenery is still well exposed.
Min. blur: Exposure time is as short as possible. Moving objects should be
well in focus while the whole scenery could be a little dark at times.
5.8

Time Lapse

If the position "ON" is selected, the camera automatically takes photos or vid-
eos in the selected time interval, no matter whether or not the PIR sensor has
detected a motion or not. As soon as the "ON" setting is confi rmed by press-
ing the "OK" button, you can enter the interval time in which photos and vide-
os are to be recorded. The format for interval between the automatic triggered
47