Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. INSTALLATION AND TRANSPORT
Containers must be opened and the machine must
be transported and installed by a SUSS MicroTec
service technician or person authorized by SUSS
MicroTec.
Users who open containers with system compo-
nents or install or transport the machine without a
SUSS MicroTec technician or a person authorized
by SUSS MicroTec do so at their own risk.
Power connections and supply connections (com-
pressed air, nitrogen, etc.) at the installation site
must be completely installed by the customer before
installation so the machine can be connected.
2.1. Prerequisites for
Installation
The following installation prerequisites must be met
before the machine can be operated optimally:
2.1.1. Ambient Requirements
•
The machine must be installed on a vibration-free
surface since vibrations can negatively influence
the machine's function. This surface must be
able to carry a load of 160 kg.
--> We recommend setting up the machine on a
SUSS MicroTec vibration-insulated base
frame intended for this purpose.
(PN: G178845; please contact SUSS
MicroTec for detailed information)
•
The machine must be installed in a clean room.
Impurities in the air have negative effect on the
machine's function.
--> We recommend clean room class 6 acc. to
ISO 14644 equivalent to former class 1000
US FED STD 209E, or better.
•
The room temperature and relative humidity
should be controlled at the setup site.
--> We recommend a room temperature
between 20°C (68°F) and 22°C (72°F) and a
relative humidity between 45 and 55% (not
condensing).
•
The back of the machine must be at least 10 cm
(4 in) away from the room wall.
SAFETY-INST MJB4 Rev09 17-03 INSTALLATION AND TRANSPORT
INSTALLATION AND TRANSPORT
See the figure „TOP VIEW with recommended
Maintenance Area" for correct positioning.
- Original Documentation -
2
7
Werbung
Kapitel
Inhaltsverzeichnis
