Arranging Ceramic "Logs" And The Embers Layer - attika VISIO GAS serie Installationsanleitung

Arranging ceramic "logs" and the embers layer

Below you can see the different ceramic "logs" that are used specifically with your fireplace. First,
find the model number on your fireplace's information plate and then the guide for laying the parts
correctly.
NB!
It is very important that you follow the instructions for positioning the ceramic "logs" and
embers layer very precisely.
Please note that there should be a small intermediary space between the "logs" that lie on the
burners and between the surrounding logs, so there is space for the flames in between them. If
there is not space for the flames, the fireplace will not burn optimally and soot may form.
31 - GB
INSTALLATION MANUAL