Mounting The Reflector Plate - Visio 3; Removing The Transport Safety Visio 2 And Visio 3 - attika V I S I O 2 Bedienungsanleitung

English

mounting the reflector plate - VISIO 3

the stove is fitted with a
reflector plate.

Removing the transport safety VISIO 2 and VISIO 3

before installing the stove remove the transport safety:
• on VISIO 2 remove 1 screw on the side.
• on VISIO 3 remove 2 screws on the back side.
RAIS/
Dismount the reflector plate and turn it
upside down. mount the plate by reus-
ing the screws at the bottom.
bend the cut-outs and
mount the plate to the
top of the stove.
attika
- User manual for VISIO
117