Connection Of Myfire Wi-Fi-Box - attika VISIO GAS serie Installationsanleitung

INSTALLATION MANUAL

Connection of MyFire wi-fi-box

If you wish to use more than the accompanying remote control, Visio Gas
can also be remotely controlled using an app on a smartphone or tablet. To
do this you must connect a MyFire wi-fi-box.
MyFire wi-fi-box (accessory)
To connect the MyFire wi-fi-box with the receiver,
which is positioned behind the inspection hatch,
you must insert a small connector on the wi-fi cable
and the input marked "SI".
The wide connector on the wi-fi cable should be
connected to the MyFire wi-fi-box.
GB - 48