Fitting The Frame - attika VISIO GAS serie Installationsanleitung

INSTALLATION MANUAL

Fitting the frame

When the logs and embers layer are correctly positioned in the gas fireplace, refit the glass as described
in the section "Removing the glass". Lastly, fit the frame on fireplace. Procedure to fit the frame:
1. Fit the frame in the top of the gas fireplace using the accompanying screws. See image (screws are
shown with arrow).
2. Place the bottom frame on – the magnets ensure the frame is secure.
3. Place the two side frames on – the magnets ensure the frames are secure.
45 - GB