Fitting secondary burners
The burners must be set down over the pipe that sticks through the perforated plate.
NB: There is a left burner and a right burner. This means that it is important that the burners are
positioned as shown, i.e. the side with the extra row of holes must face towards the front of the glass.
NB!
However, this does not apply to Visio Room Dividers and Visio Tunnel models. On these
models, the burner with two rows of holes faces away from the pilot flame.
Side 1 with one row of holes
Side 2 with two rows of holes
29 - GB
INSTALLATION MANUAL