attika VISIO GAS serie Installationsanleitung Seite 36

3. Next, spread the glass stones (both the
rounded and 'broken' glass stones) across the
area with the LED light.
5. Position log no. 3 as shown in the image.
7. Position log no. 6 so that it rests on log no. 3
and 4.
9. Position log no. 2 (with the recess) over the
left burner.
2
35 - GB
INSTALLATION MANUAL
3
6
4. Spread the embers layer (both the grey and
the black) across both the glass stones and
the base plate with the holes. Ensure that
you do not cover the pilot area and the holes
there.
6. Position log no. 4 as shown in the image.
8. Position log no. 5 so that it rests on log no. 3.
5
10. Position log no. 1 (with the recess) over the
right burner.
4
1