attika VISIO GAS serie Installationsanleitung Seite 13

INSTALLATION MANUAL
When the glass is to be refitted, follow the five steps in reverse order. NB! There is wedge in the middle
of the gas fireplace frame, which ensures the glass is fitted correctly. This wedge must fit between the
two notches on the glass. It is very important that this is done correctly otherwise the fireplace will not
close properly and soot may form during use. See the procedure below.
1. The wedge is positioned in the top of the gas fireplace frame (as shown with arrow).
2. Carefully move the glass from side to side until you can feel the glass engage with the notch.
NB: This image shows the fireplace without the frame for the sake of clarity.
GB - 12