Visio 40-55-90 RD – Visio 40-55-90 T (Visio 7)
You will find these ceramic logs in the package:
1
Procedure:
1. Start by securing two burners in the fireplace's
base plate (see the section Fitting secondary
burners for the detailed procedure).
3. Next, spread the glass stones (both the round-
ed and 'broken' glass stones) across the area
with the LED light.
43 - GB
INSTALLATION MANUAL
2
3
4
2. Place the filaments on the pilot area to create
an ember effect.
4. Spread the embers layer (both the grey and
the black) across both the glass stones and the
base plate with the holes. Ensure that you do
not cover the pilot area and the holes there.
5
6
(NB! Must not be used
with this model)