Maintenance; Storage; Waste Disposal And Environmental Protection - Parkside PHD 135 C2 Originalbetriebsanleitung

GB IE

Maintenance

The pressure cleaner is maintenance free.
Ask our service centre to car-
ry out any work that is not
described in these instruc-
tions. Use only original parts.

Storage

• Drain all the water from the pressure
cleaner.
Disconnect the unit from the water sup-
ply. Press the On/Off switch (
to turn on the pressure cleaner for no
longer than 1 minute until no more
water escapes from the jet gun (
or from the attaching parts (
Turn off the unit.
• Roll up the high-pressure hose (
and the mains connection cable (
and hang them on their respective
brackets ( 16/17).
•
Store all add-ons (
with the connection side facing down-
wards.
• Protect the pressure cleaner and its ac-
cessories from frost when they have not
been completely drained of all water.
• Store the pressure cleaner and its ac-
cessories in a frost-free room.
26
3)
9)
11/22).
2)
4)
11/22) vertically
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electric appliances should not be
disposed of in the domestic gar-
bage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center
about this.