Ending Operation; Adjusting The Nozzles; Using Detergents; Cleaning And Maintenance - Parkside PDRA 20-Li A1 Originalbetriebsanleitung

3. Releasing the switch lever (3) switches
off the device.
If there is a leak in the water
system, switch off the device
immediately and remove the
battery. Risk of electric shock!
Try connecting the water
again (see "Initial start-up -
connecting the water supply").

Ending operation

1. After having worked with a detergent
rinse the pressure cleaner with clear
water.
2. Release the switch lever (3).
3. Remove the battery from the device.
4. Disconnect the cordless pressure
washer from the water supply.
5. Press the release button (2) and the
switch lever (3) to release the existing
pressure in the system.

Adjusting the nozzles

Six different nozzles can be used on the
spray lance.
The nozzles can be changed by turning the
nozzle attachment.
A small arrow on the top of the spray
lance indicates which nozzle is currently
selected.
Jet sprays upwards
Gentle spray for watering/
washing
0°/15°/25°/40°
spray angle

Using detergents

This device has been designed to be used
with a neutral, biodegradable cleaning
agent. Other detergents or chemical sub-
stances could impair the safety of the pres-
sure cleaner and damage it. Such damage
to the equipment is not covered by the
guarantee. You can buy cleaning agents
from our online shop.
Cleaning and
Maintenance
Remove the battery before carrying
out any work on the device. This
also includes connecting to the
water supply or trying to eliminate
leaks.
There is a risk of electrocution or of
injury from moving parts.

Cleaning

Never direct the water jet
against the pressure cleaner,
nor clean the pressure clean-
er under flowing water. This
could give rise to the danger
of electric shock and damage
the pressure cleaner!
Always keep the pressure cleaner
clean. Do not use any detergents or
solvents.
• Always keep the ventilation slots (1)
clean and free.
• Clean the device with a soft brush or
damp cloth.
• If the nozzles (8) on the spray lance (9)
are soiled or clogged, you can remove
any foreign bodies in the nozzle using
a needle.
Rinse the nozzles with water to remove
the foreign body.
GB IE
21