Electrical Safety - Parkside PHD 135 C2 Originalbetriebsanleitung

are in the immediate vicin-
ity, other than they are also
wearing protective clothes.
• Take appropriate measures
to keep children away from
the equipment whilst it is run-
ning.
• Do not use the equipment
in the vicinity of flammable
liquids or gases. Non-obser-
vance will result in a risk of
fire or explosion.
• Do not spray combustible liq-
uids. Risk of explosion.
• If you come into contact with
cleaning agents, rinse with
plenty of clean water.
• Store the equipment in a dry
place and out of reach of
children.
Caution! To avoid
damage to the equip-
ment and any pos-
sible person injury
resulting from this:
• Do not work with damaged
or incomplete equipment, or
with equipment that has been
converted without the ap-
proval of the manufacturer.
Before initial operation, have
a specialist check that the
required electrical protection
measures are in place.
• Do not operate the equip-
ment if the mains cable, wa-
ter supply or other important
parts such as the high-pres-
sure hose or gun are dam-
aged/leaking.
• Protect the pressure cleaner
from frost and dry running.
• High-pressure hoses, fittings
and couplings are important
for machine safety. Use only
high-pressure hoses, fittings
and couplings recommended
by the manufacturer.
• Use only original accessories
and do not carry out conver-
sion work on the equipment.
• Please read the notes in the
operating instructions on the
topic of "maintenance and
cleaning". Any measures
above and beyond these,
particularly opening the
equipment, are to be carried
out by an authorised electri-
cian. In the case of repairs,
always contact our service
centre.

Electrical safety:

Caution: to avoid ac-
cidents and injuries
from electric shocks:
• The plug and socket of an ex-
tension cable must be water-
tight!
Unsuitable extension ca-
bles can be dangerous as
people can be harmed
by an electric shock! If an
extension cable is used
it must be suitable for
outdoor use, and the con-
nection must remain dry
and be routed above the
ground.
• Protect the electric plug con-
nections against moisture.
• If there is a risk of flooding,
fix the plug connections in an
area that is safe from flood-
ing.
GB IE
21