HBM U10M Montageanleitung Seite 29

U10M, U10S
The sensitivity is determined at the factory with the bolted-on adapter. The bolted-on
Mechanical de-
adapter ensures the best-possible screw-fastening conditions and allows the transmis-
sign
sion of axial force through a central internal thread. If the adapter is not used, a sensitiv-
ity deviation of t1% must be taken into account.
Mechanical protection through the installation of an additional square profile around the
Plug protection
connector.
Dimensions in mm approx.: WxHxB: 30x30x20
The standard version is the male device connector with bayonet locking (PT02E10-6P-
Plug version
compatible). The option is also available to install a screw-fitting male device connector
bridge A
(PC02E10-6P-compatible).
The standard version is the male device connector with bayonet locking (PT02E10-6P-
Plug version
compatible). The option is also available to install a screw-fitting male device connector
bridge B
(PC02E10-6P-compatible). Both these connection variants are often used for differenti-
ation in the double-bridge version.
Mounted force application. Standard is without force application, if requested, we can
Force applica-
mount a force application bolt. Dimensions, see Chapter 10.
tion
A1385−6.0 en/de/fr
29
HBM