Versions And Order Numbers - HBM U10M Montageanleitung

28
8

Versions and order numbers

Order codes and measuring ranges
Code Measuring
range
1k25 1.25 kN
2k50 2.5 kN
5k00 5 kN
12k5 12.5 kN
25k0 25 kN
50k0 50 kN
125k 125 kN
225k 225 kN
250k 250 kN
450k 450 kN
500k 500 kN
Number Charac-
of mea- teristic
suring value
bridges
Single Not
bridge ad-
justed
SB N
Double Ad-
bridge justed
DB J
K-U10M- 12k5 DB
K-U10S- 450k SB
Number of mea- For reasons of redundancy, in devices relevant to safety it is necessary to check the
suring bridges
plausibility of the measurement signal with a second measuring bridge (installed on the
same measuring element). The signals are independently conditioned and evaluated
using two separate measuring amplifiers.
The exact nominal (rated) sensitivity is specified on the identification plate. The trans-
Characteristic
ducer can also be adjusted to a whole number sensitivity of 1.0 mV/V or 2.0 mV/V (If
value
200% calibration selected: 2 mV/V or 4 mV/V). The rel. sensitivity error (compression) is
then 0.1% of the nominal (rated) sensitivity. The sensitivity range of a unadjusted trans-
ducer lies between 1 and 1.5 or 2 and 2.5 mV/V.
In the standard version, the transducer is designed for dynamic application up to a
Calibration
vibration bandwidth of "100% F
used up to 200% F
TEDS integration (integrated electronic data sheet) in accordance with IEEE1451.4
Transducer iden-
tification
HBM
Order no.:
1-U10M/1.25 kN 1-U10S/1.25 kN
1-U10M/2.5 kN 1-U10S/2.5 kN
1-U10M/5 kN 1-U10S/5 kN
1-U10M/12.5 kN 1-U10S/5 kN
1-U10M/25 kN 1-U10S/25 kN
1-U10M/50 kN 1-U10S/50 kN
1-U10M/125 kN 1-U10S/125 kN
1-U10S/225 kN
1-U10M/250 kN
1-U10S/450 kN
1-U10M/500 kN
Calibra- Transducer
tion identification
100 % Without
(dyn.) TEDS
1 S
200 % With TEDS
(stat.)
2 T
J 2 T
J 2 S
. The option is available to calibrate accordingly to 200% F
nom
Mechani- Plug Plug ver-
cal de- protec- sion bridge
sign tion
With Without
adapter connector
W U
Without With Threaded
adapter connector
N P
W P
N U
. For quasistatic applications, the transducer can be
nom
U10M, U10S
Preferred version,
available at short
notice
Plug ver-
sion bridge
A B
Bayonet Bayonet
connector
B B
Threaded
connector
G G
B G
G
A1385−6.0 en/de/fr
Force
applica-
tion
(U10M
only)
With-
out
O
With
L
O
.
nom