Maintenance And Cleaning; Handling - VOLTCRAFT Ultimate 400 W Bedienungsanleitung

19. MAINTENANCE AND CLEANING

The product does not require any maintenance. You should never take it apart.
The product should only be repaired by a specialist or specialist workshop or it may be
damaged. Furthermore, the CE approval and the guarantee/warranty will expire.
Clean the product only with a soft, clean, dry and fuzz-free cloth. Do not use cleaning
agents as they may corrode the casing and wear off the labelling.
Dust can be removed using a clean, soft brush and a vacuum cleaner.

20. HANDLING

• Observe all safety information in these operating instructions. They provide
important information on dangers when handling chargers and rechargeable
batteries.
• This product is not a toy and not suitable for children. Children cannot judge
the dangers involved when handling chargers or batteries.
• Avoid the following unfavourable ambient conditions at the place of
installation, during operation or when transporting:
- Dampness or high humidity
- Heat (>+35 °C) or cold (<+5 °C), direct sunlight
- Dust or flammable gases, fumes or solvents
- Strong vibration, impact or blows
- strong magnetic fields as present near machines or speakers
• Place the charger on a level, firm surface. It must be large enough so that
the connected battery/battery pack can be safety placed alongside the
charger. Maintain a sufficient distance between the charger and battery (and
the power supply) to prevent them from heating each other up.
The battery/battery pack must not be placed on or under the charger!
• When setting up and operating the product, make sure that the cables are
neither bent nor pinched.
• Never cover the charger and the battery. Heat accumulation will not only
destroy the charger, but also cause danger of fire and explosion!
94