Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Cleaning And Maintenance - VOLTCRAFT V-CHARGE ECO LIPO 2000 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für V-CHARGE ECO LIPO 2000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Assignment of the XH sockets is imprinted on the charger upper side. As a rule, one of
the cables of the XH plug is marked at the battery with colour (or is black). Besides, the
XH plug fits into matching socket of the charger only in one position.
If your battery has a balancer connector with other plug type than XH, there will be a
matching adapter in the accessories trade.
Only connect a single battery to the charger at a time. Always use only one of the
XH sockets at a time.
P lease note that only a LiPo battery of serial configuration can be charged (marked
e.g. as 2S, 3S, 4S).
Special batteries with e.g. connectors of both cells led out separately cannot be
charged by this charger.
• The charger starts the charging process and charges the LiPo battery via its balancer
connector. Adaptation of the cell voltages occurs at the same time, so that all cells have the
same voltage after the charging process is completed (insignificant deviations depend on
technical factors).
The charging current or capacity of the charger (see chapter "Technical data") is divided to
cells depending on their number. The more cells the connected battery has, the longer is
the charging process.
• Four LEDs on the charger indicate the charging status (25%, 50%, 75% and 100%).
Once the LED "100%" lights up, the battery is fully charged. Disconnect the battery from
the charger.
• Now, either connect another battery for charging, or disconnect the charger from the mains
voltage. Pull the mains plug out of the mains socket.
Keep the product in a cool, dry, dust-free place out of the reach of children.

CLEANING AND MAINTENANCE

The product does not require any maintenance and should never be disassembled for any
reason.
Unplug the connected battery from the charger before cleaning. Disconnect then the charger
from the mains voltage. Pull the mains plug out of the mains socket.
Only clean the product with a soft, clean, dry cloth. Dust can be easily removed using a clean,
soft brush and a vacuum cleaner.
Never use aggressive cleaning agents or chemicals for cleaning; these can lead not only to
discolouration, but can also damage the product.
DISPOSAL
a) General
Electronic devices are recyclable material and do not belong in the household
waste.
Please dispose of the device, when it is no longer of use, according to current statu-
tory requirements.
b) Batteries and rechargeable batteries
As the end user, you are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries; disposal of them in the household waste is prohibited!
Batteries/rechargeable batteries contain harmful materials and are labelled with the
symbol shown to indicate that disposal in the household waste is forbidden. The
symbols of the relevant heavy metals are: Cd=Cadmium, Hg=Mercury, Pb=Lead
(name written on the battery/rechargeable battery, e.g., under the rubbish bin
symbol on the left).
You can return your used batteries/rechargeable batteries free of charge at the official col-
lection points of your community, in our stores, or at places where batteries or rechargeable
batteries are sold.
You thereby fulfil your statutory obligations and contribute to the protection of the environ-
ment.

TECHNICAL DATA

Charger type
V-CHARGE ECO LiPo 2000
Item no.
Operating voltage
Protection class
Charging sockets
Appropriate battery type
Number of cells
Battery capacity
Charging current
Charging capacity
Cut-off voltage
Balancer current
Short-circuit protection
Overload protection
Ambient conditions
Dimensions (W x L x H)
Weight
G
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
V-CHARGE ECO LiPo 3000
1409523
1409525
100 - 240 V/AC, 50/60 Hz
II
XH balancer connector
LiPo (with rated voltage per cell 3.7 V)
2 - 3
800 - 5000 mAh
800 - 8000 mAh
max. 2 A ±10%
max. 3 A ±10%
25 W
4.24 V (per cell)
400 mA
yes
yes
Temperature +10 °C to +40 °C,
air humidity 0% to 90% relative, not condensing
70 x 110 x 40 mm
72 x 117 x 40 mm
161 g
2 - 4
35 W
178 g

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

V-charge eco lipo 300014095231409525

Inhaltsverzeichnis