VOLTCRAFT Ultimate 400 W Bedienungsanleitung Seite 79

• To begin the charging process, keep the „START/ENTER" button pressed for longer
(approx. 3 seconds).
• If the settings are wrong, or if the charger detects a problem, an audio signal is emitted
and the appropriate information is shown on the display.
You can stop the warning signal by pressing the „BATT TYPE/STOP" button. You then
return to the previous configuration menu.
• If the battery is detected correctly, the following display appears, for example:
Battery type
Pb-6 0.5A 12.59V
CHG 022:20 00207
Current charging duration
• Once the charging process is complete, an audio signal is emitted.
If you wish to terminate the charging process beforehand, push the „BATT TYPE/
STOP" button.
Charge Current Battery Voltage
Charged capacity in mAh
79