VOLTCRAFT Ultimate 400 W Bedienungsanleitung Seite 89

With the option „Key Beep", you activate/deactivate the confirmation beep for each push
of a button.
The option „Buzzer" switches the signal of functions/warning messages on or off.
Briefly push the „START/ENTER" button. „ON" (or „OFF") starts to flash in the top display
line.
With the buttons „INC" or „DEC", you can select between „ON" and „OFF".
Briefly push the „START/ENTER" button in order to save. „ON" (or „OFF") then starts to
flash in the bottom display line.
With the buttons „INC" or „DEC", you can select between „ON" and „OFF".
Save the setting by pressing the „START/ENTER" button.
• With the „INC" button, you access the next setting (or with the button „DEC" the previous
setting or return to the main menu with the button „BATT TYPE/STOP").
Input Power Low
Cut-Off
This function monitors the voltage at the charger input (e.g. for a 12 V battery). If the
voltage drops to less than the value set, charging is interrupted.
Briefly push the „START/ENTER" button. The voltage value then begins to flash.
With the buttons „INC" or „DEC", you can set the voltage value
(10,0...11,0 V).
Save the setting with the „START/ENTER" button, the voltage stops flashing.
10.0V
89