Program Playback - Yamaha DVX-700 Bedienungsanleitung

Program playback

Select [Program] in the Play Mode menu, then press
ENTER.
When playing a DVD, you can program the order the
titles/chapters are played back. When playing a CD/Video
CD, you can only program the order the tracks are played
back.
Programming the playback order
Select [Create/Edit] and press ENTER to open program
list to set the playback order. Use
ENTER to program the order. You can store up to 24
steps.
Each time you press ENTER, the step moves to the next.
Use the same procedure to complete the programming.
Program
Program Step Track 1-14
01. Track 01
02. Track 02
03. Track 03
04. Track 04
Track 05
05.
06. Track 06
07. Track 07
08. Track 08
Hints
– To remove the step, press CLEAR on the step.
– To add a step in the middle of the list, select a title/
chapter/track.
– If you press SETUP after programming, program
playback is canceled. To do the program play back
again, enter [Program] again.
Starting/Stopping program playback
In program mode, press h to start program playback.
Press s to stop the program playback.
During program playback, press b / a to skip to the
next or previous programmed title/chapter/track.
Hint
You can also start/stop program playback by selecting
[Playback Start]/[Playback Stop].
Deleting the program order
Select [Program Delete] in the menu, then press ENTER.
Using search mode
Select [Search Mode] in Play Mode menu, then press
ENTER.
Select the item you want to search, then enter a title/
chapter/track number using Numeric keypad 0-9.
Press ENTER to start playback.
Search mode types
DVD:
CD/Video CD:
DivX
You can select [Time Search] during playback. Enter a 4-
digit number to specify the minutes and seconds. For
example, to specify 32 minutes and 20 seconds, enter
3220. To specify 1 hour, 25 minute, and 40 second, enter
/ / / and
8540.
Total Time 000.00
[Title Search], [Chapter Search], [Time
Search]
[Track Search], [Time Search]
®
/WMV: [Time Search], [Chapter Search]
(if supported)
DISC OPERATION
4
31
En