Video Adjust Menu - Yamaha DVX-700 Bedienungsanleitung

This setup is carried out via the TV,
enabling you to customize the DVD
controller to suit your particular
requirements
TOP MENU
PRESET
INFO.
A-E
ENTER
SETUP
TV/ STB
TUNER
TV INPUT
DVD/ USB INPUT 1-4
POSITION AREA
1 Press DVD/USB repeatedly to switch the input source
to DVD.
2 Press SETUP on the remote control.
DVD setup menu appears.
Play Mode
Initial Setting
3 Press
/ / /
then press ENTER.
Video Adjust
Sharpness Fine
Brightness Standard
Contrast Soft
Gamma
Hue
Chroma Level

VIDEO ADJUST MENU

MENU
A-E
RETURN
CODE SET
MUTE
DOCK
SOUND TEST
Video Adjust
Disc Navigator
to highlight [Video Adjust],
4 Select the item that you want to adjust, press ENTER,
and then press /
quality.
You can adjust the following items in Video Adjust
menu.
[Sharpness]
Select this to adjust the sharpness. Choose from Fine/
Standard/Soft.
[Brightness]
Increase or decrease the value to adjust the brightness.
You can adjust the value from -20 to +20 using
[Contrast]
Increase or decrease the value to adjust the sharpness. You
can adjust the value from -16 to +16 using
[Gamma]
Select this to adjust the darkness. Choose from High/
Medium/Low/Off.
[Hue]
Select this to adjust the balance of green and red. You can
adjust the value from Green 9 to Red 9 using
[Chroma Level]
Select this to adjust the color density. You can adjust the
value from –9 to +9 using
5 Press ENTER to confirm.
Repeat steps 3 and 4 if necessary.
6 Press SETUP to close the menu.
Hints
– Once you confirm the values, you can select other
items in Video Adjust menu.
– If the settings you have selected are not
appropriate, you can reset DVD settings to the
initial factory settings (Page 57).
]
Note
The sharpness setting does not affect the HDMI
signal.
/ / to adjust the image
/ .
/ .
/ .
/ .
37
En
5