Ntroduction - Parkside PHSHE 900 A1 Originalbetriebsanleitung

MT
GB
Content
ntroduction ................................52
Intended Use ..............................53
General Description ....................53
Extent of delivery ........................... 53
Overview ...................................... 53
Safety features ............................... 54
Function Description ....................... 54
Technical Data ............................54
Notes on Safety .........................55
Symbols in the manual .................... 55
Symbols on the Equipment .............. 55
General Notes on Safety ................. 56
General safety instructions
for power tools .............................. 56
Hedge trimmer safety warnings ....... 59
Safety information for chainsaws ..... 60
Kickback causes
and how to avoid them ................... 61
Assembly ...................................61
Mounting the tubular shaft ............... 62
Mounting the round handle ............. 62
Mounting the saw chain .................. 62
Operating the Hedge Trimmer ....62
Chain lubrication ........................... 63
Swivelling Out the Blade Beam ............. 63
Pivoting the pole-mounted pruner ..... 63
Attach the shoulder strap ................ 63
Sliding the carrying eye .................. 64
Switching On and Off .................... 64
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has been
checked for quality and subjected to a inal
inspection. The functionality of your equip-
ment is therefore guaranteed. It cannot be
ruled out that residual quantities of lubri-
52
Working with the
Electric Hedge Trimmer ................... 64
Working with the
pole-mounted pruner....................... 65
Putting down the device .................. 65
Swivelling the Arm ......................... 65
Cutting techniques using
the hedge trimmer .......................... 65
Cutting techniques using
the pole-mounted pruner ................. 66
Working Safely ..........................67
Maintenance/Cleaning ...............67
Service intervals............................. 68
Sharpening the cutting teeth ............ 68
Changing the saw chain ................. 68
Servicing the blade bar .................. 68
Turning the blade bar ..................... 69
Storage ......................................69
Transport ...................................69
Waste Disposal and
Environmental Protection..........69
Trouble Shooting ........................70
Guarantee .................................71
Repair Service ............................72
Service-Center ............................72
Importer ....................................72
Spare Parts/Accessories .............72
Translation of the original
EC declaration of conformity ...... 96
Exploded Drawing ................... 101
cants will remain on or in the equipment in
isolated cases. This is not a fault or defect
and it represents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use and
disposal.