Combination Possibilities; Intended Use; Environmental Conditions - Ottobock 1S101 SACH+ Gebrauchsanweisung

1.2 Combination possibilities

This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
Permissible ankle blocks and screw connections
Foot size [cm]
24 to 25
26 to 30
Body weight [kg]
≤100
101 to 125

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 1 (indoor walk­
er) and mobility grade 2 (restricted outdoor walker).
m°
kg
• The maximum approved body weight is specified in the technical data
(see Page 19).

2.3 Environmental conditions

Storage and transport
Temperature range –20 °C to +60 °C (–4 °F to +140 °F), relative humidity 20 % to
90 %, no mechanical vibrations or impacts
Allowable environmental conditions
Temperature range: –10 °C to +45 °C
Chemicals/liquids: fresh water, soapsuds, chlorine water
Moisture: Submersion: max. 1 h in 2 m depth, relative humidity: no restrictions
Solids: Dust, occasional contact with sand
12
Reference number (ankle block and screw connection)
Allowable foot adapters
Foot size [cm]
21 to 30
26 to 27
28 to 30
2K34=25 and 2Z22=M10
2K34=30 and 2Z22=M10
Reference number (foot adapter)
2R8=M10, 2R31=M10, 2R54=M10
2R8=M10, 2R31=M10
2R31=M10