Construction And Function; Combination Possibilities; Environmental Conditions - Ottobock 1S49 SACH Gebrauchsanweisung

1.1 Construction and Function

The 1S49, 1S66, 1S67 and 1S90 SACH prosthetic feet (Solid Ankle Cush­
ion Heel) are suitable for use in both modular and exoskeletal prostheses.
The functional properties are achieved through the combination of a con­
toured core and functional foam.

1.2 Combination Possibilities

This prosthetic component is part of the Ottobock modular system. As a res­
ult of its design, it may be combined with other prosthetic components of the
modular system. You can find possible restrictions in this section. Contact
the manufacturer with questions.
2 Application
2.1 Intended Use
The product is intended solely for lower limb prosthetic fittings.
2.2 Area of Application
Area of application according to the MOBIS mobility system:
Size 21 – 25
Recommended for Mobility Grades 1 and 2 (indoor walkers and
restricted outdoor walkers). Approved for a body weight of up to
m°
kg
100 kg.
Size 26 – 30
Recommended for Mobility Grades 1 and 2 (indoor walkers and
restricted outdoor walkers). Approved for a body weight of up to
m°
kg
125 kg.

2.3 Environmental Conditions

Allowable Environmental Conditions
Temperature range for use: -10 °C to +60 °C (14 °F to 140 °F)
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e. g. talcum)
10 | Ottobock