Scope Of Delivery; Instructions For Use; Preparation For Use - Ottobock 1S101 SACH+ Gebrauchsanweisung

4 Scope of delivery

Quantity
1
1
Spare parts/accessories (not included in the scope of delivery)
Fig. Item
2 1
2 2
3 –
4 –
– –

5 Preparation for use

CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
INFORMATION
► Not all of the materials may be available in your country. In this case,
please contact the local branch of the manufacturer to obtain informa­
tion on alternative materials.
5.1 Installing the foot adapter
► Install the foot adapter on the prosthetic foot according to its instructions
for use.
5.2 Assembling the ankle block (exoskeletal design)
Required materials: Screw connection (see Page 15), 710D4 torque
>
wrench, sandpaper (grain size 40), 636W28 Ottobock special adhesive
and hardener, suitable solvent (e.g. 634A28)
1) Insert the threaded socket of the screw connection in the proximal side
of the hole in the ankle block.
2) Insert the screw on the foot sole side in the prosthetic foot and screw the
ankle block to the prosthetic foot (torque: 30 Nm).
3) Conduct the fitting of the ankle block.
Designation
Foot adapter with screw connection
Connection plate
Ankle block (exoskeletal design)
Screw connection for ankle block
(exoskeletal design)
Ottobock special adhesive with
hardener
Designation

Instructions for use

Prosthetic foot
Reference number
2R8*, 2R31*, 2R54*
636W28 or 636W18 and
2R14
2K34=*
2Z22=M10
636W19
15