Original Accessories/Auxiliary Equipment; Safety Instructions For Grinding Tools - Parkside PTS 710 A2 Originalbetriebsanleitung

Original accessories/auxiliary equip-
ment
■ Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.
Cutting saw blade (symbols)
Wear ear muffs!
Wear safety goggles!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding!
Approved diameter of tools
89 mm
Not approved for side grinding

Safety instructions for grinding tools

a) General
Grinding tools are susceptible to breakage; there-
fore extreme care is required when handling grind-
ing tools. Using damaged, incorrectly clamped or
incorrectly installed grinding discs is dangerous
and may cause serious injury.
b) Handling, transport and storage
Grinding tools are to be treated with care and
transported carefully. Grinding tools should be
stored in such a way that they are not exposed
to mechanical damage or harmful environmental
influences.
│ GB │ MT
■ 64
Avoid any risk of an electric shock.
■ Check the condition of the appliance, power
cord and plug regularly. Stop using appliances
if any of the aforementioned parts are dam-
aged. Never open the appliance. Damaged
appliances, power cords or power plugs cause
danger to life by electric shock. Have repairs
and replacement work done only by the Service
centre or a qualified electrician.
■ Do not operate the appliance if it is damp or in
a humid environment.
■ When working outdoors, connect the appliance
via a fault current circuit breaker with a max-
imum tripping current of 30 mA. Use only an
extension cord approved for outdoor use.
NOTE
► Always hold the power cord away from the
working area of the machine and run it to the
rear away from the machine.
PTS 710 A2