Further Safety Instructions For Abrasive Cutting Applications - Parkside PTS 710 A2 Originalbetriebsanleitung

i) Do not use damaged grinding discs. Check
the grinding discs before each use for chips
and cracks. If the power tool or grinding disc
is dropped, check to see if it either are dam-
aged, or use an undamaged grinding disc.
After checking and inserting the grinding
disc, ensure that you and any other people
in the vicinity remain outside of the range of
the rotating grinding disc and allow the tool
to rotate at maximum speed for one minute.
Damaged grinding discs usually break during
this test period.
j) Wear personal protective equipment.
Depending on the application, ensure that
you use full face protection, eye protection
or goggles. If required, use a dust mask, ear
muffs, protective gloves or a special apron to
protect you from grindings and material par-
ticles. Protect your eyes from flying debris that
may be created during certain applications.
Dust or filter masks must be used to filter any
dust created by the application. If you are ex-
posed to loud noise for any length of time, you
can suffer a hearing loss.
k) Ensure that other people remain at a safe dis-
tance to your workspace. Anyone who enters
the workspace must wear personal protective
equipment. Fragments of the workpiece or bro-
ken accessory tools can fly off and cause injury
– even outside the immediate working area.
l) Hold the power tool only by the insulated
handles while you are carrying out work
during which the accessory tool may come
into contact with concealed power cables or
the tool's own power cord. Contact with a live
cable can also make metal parts of the appli-
ance live and could result in an electric shock.
│ GB │ MT
■ 62
m) Keep the power cord away from any rotating
accessories. If you lose control of the appli-
ance, the cord may get cut or caught and your
hand or arm could get caught in the rotating
accessory tool.
n) Never put the power tool down until the
accessory tool has come to a complete stand-
still. The rotating accessory tool could come
into contact with the surface and cause you to
lose control of the power tool.
o) Do not leave the power tool running whilst
carrying it. Accidental contact between your
clothing and the rotating accessory tool could
cause your clothing to get caught and the ac-
cessory tool to penetrate a part of your body.
p) Clean the ventilation slits of your power tool
regularly. The engine fan draws dust into the
housing and a strong accumulation of metal
dust can cause electrical hazards.
q) Do not use the power tool in the vicinity of
flammable materials. Sparks can ignite such
materials.
r) Do not use any accessory tools which require
liquid coolant. The use of water or other liquid
coolants may lead to an electric shock.
Further safety instructions for abra-
sive cutting applications
Kickback and corresponding safety instruc-
tions
Kickback is a sudden reaction caused when a
rotating grinding disc catches or jams. Catching or
jamming causes the rotating accessory tool to stop
abruptly. If this happens, an uncontrolled power
tool turns rapidly against the direction of rotation
of the accessory tool caught in the blockage.
PTS 710 A2