Connector J11 - Purge Flow Meter Connector - Agilent Technologies Turbo-V 300 ICE serie Bedienungshandbuch

17 Technical Information
Interconnections

Connector J11 - Purge Flow Meter Connector

Figure 15
Tab. 5
PIN
1-3
5-6
Use this connector (J11) only with the Agilent solid state flowmeter model
CAUTION!
969-9114 or 969-9115. Any other connection could lead to serious injury.
218/260
J11 connectors
DESCRIPTION
Flow meter power supply: 12 Vdc, 10 mA, (pin 1 negative - pin 3 positive)
Analog signal with a voltage value proportional to the flow.
Between 0 and 3 V it is linearly proportional to between 0 and 100 sccm (pin 6
negative, pin 5 positive)
Turbo-V 300 ICE Controller User Manual / 87-900-902-01 (M)