Interconnections; Connection P1 - Logic Input Interconnections - Agilent Technologies Turbo-V 300 ICE serie Bedienungshandbuch

17 Technical Information

Interconnections

Interconnections

The following figure shows the Controller interconnections.
Figure 8

Connection P1 - Logic Input Interconnections

Figure 9
All the logic input to the controller must be connected at J1 mating
connector. With the provided J1 mating connector (shipped with pin
3 and pin 8 shorted) make the connections with AWG 24, (0.24 mm2 )
or smaller wire to the pins indicated in the figure to obtain the
desired capability. The following table describes the signals available
on the connector.
212/260
Controller models 969-9433 and 969-9533 interconnection
P1 input connector
Turbo-V 300 ICE Controller User Manual / 87-900-902-01 (M)