Agilent Technologies Turbo-V 300 ICE serie Bedienungshandbuch Seite 233

After pressing the START push-button, if the P1 connector is not in place with
NOTE
the link or the external interlock connection are open, the display will be as
shown in the following figure.
P
I
Unplug the controller power cable and verify the P1 connection
according to paragraph "Interconnections".
X
T
Figure 21
Where:
Turbo-V 300 ICE Controller User Manual / 87-900-902-01 (M)
U M P W
N T E R
Press the PUMP CURRENT push-button and the display shows
(e.g.):
X K R
1 = X X
I = is the DC current drawn by the pump range (0.00 to 10.0 A)
P = is the DC power drawn by the pump (range 0 to 999 Watt)
KRPM = is the theoretical rotational speed of the pump as a
function of the controller output frequency (range 3 to 56 KRPM)
A I T I
L O C K
P M P
° C I
Technical Information
Use
N G
= X X X W
= X X . X
233/260
17
A