Technical Data; Spare Parts - FLORABEST FAH 18 A Originalbetriebsanleitung

Technical Data

Appliance
Motor voltage .............................18 V
Capacity ...................................... 1.5 Ah
Idling speed . ................ 1100 min
Protection Class ................................. III
Runtime . .............................max. 50 min
Cutting length ............................515 mm
Cutting capacity...........................15 mm
Weight .........................................2.5 kg
Sound pressure level
(L ) ...............................73 dB (A), K
pA
Sound power level (L
guaranteed............................96 dB(A)
measured .................. 93 dB(A); K
Vibration (a ) ..........................................
n
Rear handle . ..........2.0 m/s
Front handle ..........2.6 m/s
Battery (NiMH)
Nominal voltage .........................18 V
Capacity ...................................... 1.5 Ah
Charging time . ..................... approx. 1 h
Recharger
Uptake voltage ........ 230-240V~50/60Hz
Nominal consumption.................... 67 W
Voltage output ............................18 V
Recharging curren....................... 1.95 A
Protection class . .............................
Protection category ........................ IP20
* The actual runtime under load of a fully char-
ged battery depends on how you work and on
the load put on the trimmer during operation.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
(rpm)
-1
=3
pA
)
wA
=3
wA
, K=1,5 m/s
2
, K=1,5 m/s
2
II
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the power
tool from the stated value depend-
ing on the manner in which the
power tool is used.
2
Safety precautions aimed at pro-
2
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Spare Parts

The following spares are available from
Grizzly Service-Center. Please indicate
the machine type and the number of the
spare part with your order.
Battery ..................................... 91094283
Battery charger ......................... 91094284
If further spare parts should be neces-
sary, please find the part number on the
exploded drawing.
GB
15