Technical Data; Notes On Safety; Symbols In The Manual - FLORABEST FHT 600 C3 Originalbetriebsanleitung/Ersatzteilliste

Technical Data

Electrical Hedge Trimmer ..........FHT 600 C3
Input voltage rating ... 230-240 V~, 50 Hz
Input power (power consumption) ..600 W
Safety class .....................................
Protection category........................... IPX0
Cutting rate ............................2800 min
Weight (incl. accessories) ...approx. 3.6 kg
Cutting length ................ approx. 600 mm
Blade length .................. approx. 680 mm
Blade gap ....................... approx. 24 mm
Sound pressure level
(L ) .............. 90.45 dB(A), K
pA
Sound power level (L
guaranteed ......................... 101 dB(A)
measured ...... 98.41 dB(A); K
Vibration (a ) at the
h
handle ............2.578 m/s
bow handle .....3.519 m/s
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
=3 dB(A)
pA
)
wA
=3 dB(A)
wA
; K=1.5 m/s
2
; K=1.5 m/s
2
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
II Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
-1
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Notes on Safety

Before working with the equip-
ment, familiarise yourself with all
2
operating components. Practice
2
handling the equipment and have
the function, operation and working
methods explained to you by an ex-
perienced user or specialist. Ensure
that you can shut off the equipment
immediately in an emergency. Inap-
propriate use of the device may
result in serious injury.

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
GB MT
19