Technical Data; Safety Instructions; Symbols - FLORABEST FGS 3.6 A1 Originalbetriebsanleitung

GB
mer. The safety key protects the devices
from being started unintentionally.
Please read the following descriptions for
the function of the various controlling parts
of the unit.

Technical data

Unit
Motor voltage ............................ 3.6 V
Rated speed .......................... 1000 min
Protection class ................................... III
Protection category.......................... IP21
Grass-trimming blade
Cutting width ............................73 mm
Blade width ..............................80 mm
Shrub-trimming blade
Cutting length ........................120 mm
Dist ance between teeth ...approx. 8 mm
Weight (incl. accessories) .. approx 0.85 kg
Sound pressure level
(L ) ....................55.1 dB(A), K
pA
Sound power level (L
guaranteed ........................... 92 dB(A)
measured ...........75.1 dB(A); K
Vibration (a )
h
at handle ........... 1.2 m/s
Battery (Li-Ion)
Nominal voltage ......... 3.6 V
Loading time .................. approx. 3-5 h
Charger ................. JLH030600400G
Voltage input .......
Nominal consumption ...................... 8 W
Voltage output ..................................6 V
Recharging current ..................... 400 mA
Protection class ...............................
Protection category...........................IPX0
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement. Technical and
optical alterations to serve progress may be
made without notice. All measurements, in-
6
=3 dB
pA
)
WA
=3 dB
WA
, K=1.5 m/s
2
1.3 Ah
100-240 V~, 50-60 Hz
structions and other data given in this man-
ual are therefore given without guarantee of
correctness. Legal claims made on the basis
of this manual are therefore excluded.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
-1
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.Safety precau-
tions aimed at protecting the user
should be based on estimated expo-
sure under actual usage conditions
(all parts of the operating cycle are
to be considered, including, for ex-
ample, times during which the power
tool is turned off and times when the
tool is turned on but is running idle).

Safety Instructions

2
This unit can cause serious in-
jury if not used correctly. Be-
fore using the unit, carefully
read through the instruction
manual and familiarise your-
self with all of its controls.

Symbols

II
Symbols on the unit
Before using for the first time, care-
fully read through the user manual.
Attention!