Package Contents; Technical Data - FLORABEST FHEHS 900 A1 Originalbetriebsanleitung

Package contents

1 Motor unit FHEHS 900 A1
1 Hedge trimmer attachment FHS 1 (hereinafter hedge trimmer)
1 Pole pruner attachment FHE 1 (hereinafter pole pruner)
Accessories
1 Shoulder strap
1 Protective cover for the chain
1 Protective cover for blade
1 100 ml organic chain oil
1 Mounting tool
1 User manual

Technical data

Motor unit FHEHS 900 A1
Rated voltage: 230 V ~ 50 Hz (alternating current)
Nominal power: 900 W
Protection class: II /
Weight:
(without handle and
carrying strap): approx. 2.6 kg
Pole pruner: FHE 1
No-load speed: max. 6 m/s
Working angle: 0 - 22,5°
Weight (ready for use): approx. 1.6 kg
Recommended fill level (oil tank) 100 ml
Cut length: approx. 260 mm
Blade: Oregon Type 91 100SDEA041
Saw chain Oregon 91P040X
Oregon 91P040E
Hedge trimmer FHS 1
Idle speed: 2000 min
Working angle: -45° - 90°
Cut length: 410 mm
Tooth spacing: 20 mm
Weight (ready for use): approx. 2.1 kg
Noise and vibration data:
The A-rated noise level of the power tool is typically as follows:
Pole pruner: FHE 1
Sound pressure level: 88.18
Uncertainty K:
Sound power level: 100.63
Uncertainty K:
Hedge trimmer FHS 1
Sound pressure level: 87.08
Uncertainty K: 3
Sound power level: 98.37
Guaranteed
sound power level: 102
Uncertainty K: 3
FHEHS 900 A1
-1
dB(A)
3 dB
dB(A)
3 dB
dB(A)
dB
dB(A)
dB(A)
dB
Vibration values (vector total of three directions) determined in accordance
with EN 60745
Pole pruner:
Vibration at the front handle: Vibration emission value
a
Uncertainty K = 1.5 m/s
Vibration at the rear handle: Vibration emission value
a
Uncertainty K = 1.5 m/s
Hedge trimmer
Vibration at the front handle: Vibration emission value
a
Uncertainty K = 1.5 m/s
Vibration at the rear handle: Vibration emission value
a
Uncertainty K = 1.5 m/s
Wear hearing protection!
NOTE
► The vibration level specified in these instructions has been measured
in accordance with a standardised measuring procedure specified in
EN 60745 and can be used to make equipment comparisons. The
specified vibration emission value can also be used to make an initial
exposure estimate.
WARNING!
► The vibration level varies in accordance with the use of the power
tool and may be higher than the value specified in these instructions
in some cases. There is a risk of underestimation of the vibration load
if the power tool is used regularly in this manner. For an accurate
estimate of the vibration load during a specific working period, the
periods during which the appliance is switched off or is running but
not actually being used must also be taken into consideration. This
can significantly reduce the vibration load over the total working
period.
Explanation of symbols on the appliance!
Read the operating instructions and safety
advice before initial operation.
Wear protective gloves!
Wear safety shoes!
Wear ear protection!
Wear a hard hat!
Wear protective glasses!
= 1.018 m/s 2
h,D
2
= 1.213 m/s 2
h,D
2
= 1.447 m/s 2
h,D
2
= 1.773 m/s 2
h,D
2
GB
3