Customer Programming; Customer Parameters Menu; Language Selection; Service Time - LaCimbali M1 Gebrauch Und Installation

Use the "+" (30) and "-"
clock.
The time increases (or decreases) one minute each time
the key is pressed.
If one of the keys (30 or 31) is pressed and held down for
more than 10 seconds, the minutes setting stops and the
hours setting increases (or decreases).
During the time setting phase, the seconds remain at "00".
To access "CUSTOMER PARAMETERS" press
key; the following message will appear on the display:
To display the messages in a different language from that
set, after entering into Programming mode, position the
cursor on the desired language by pressing the "+"
and "-" (31) keys and then pressing the PRG
key. The machine will restart with the messages provided
in the selected language.
The display (5) provides a choice of the following languages.:
Italian, English, German, French, Spanish, Portuguese,
Dutch, Japanese, Russian, traditional Chinese and modern
Chinese.

CUSTOMER PROGRAMMING

17. Clock adjustment
(31) keys to adjust the

18. Customer parameters menu

(34)

Language selection

(30)
(29)
25 EN
10 March 2010
wednesday 15:15:04
CUSTOMER PARAMETERS

SERVICE TIME

ITALIANO
ENGLISH
DEUTSCH
FRANCAIS
CUSTOMER PARAMETERS
SERVICE TIME
ITALIANO
ENGLISH
DEUTSCH
FRANCAIS
+
+