Error Indications - Pyramis ecoline Installations- Und Gebrauchsanleitung

ERROR INDICATIONS

When situations preventing normal operation of the control occur, the device enters the Error
Any active Cooking will be terminated and an error code is displayed on Temperature Display
the error recovers, this code will remain on the display until the navigator knob is pushed and
3 seconds.
ERROR INDICATIONS
When situations preventing normal operation of the control occur, the device enters the Error Mode.
Any active Cooking will be terminated and an error code is displayed on Temperature Display. Even if
Error Definition and Possible Causes
the error recovers, this code will remain on the display until the navigator knob is pushed and held for
Oven cavity temperature sensor open circuit or damaged
3 seconds.
PT-1000-MX-XXX sensor connector may be loose on the circuit
PT-1000-MX-XXX sensor may be defect
Error Definition and Possible Causes
Oven cavity temperature sensor open circuit or damaged
Electonic board may be defect
PT-1000-MX-XXX sensor connector may be loose on the circuit
Reserved
PT-1000-MX-XXX sensor may be defect
Meat Probe short circuit
Electonic board may be defect
Meat probe sensor may be defect
Reserved
Electonic board may be defect
Meat Probe short circuit
Meat probe sensor may be defect
Temperature sensor reading exceeds 400 °C
Electonic board may be defect
PT-1000-MX-XXX sensor may be defect
Temperature sensor reading exceeds 400 °C
Electonic board may be defect
PT-1000-MX-XXX sensor may be defect
At Manuel mode or Cooking with Meat Probe, maximum working time limit (10
Electonic board may be defect
At Manuel mode or Cooking with Meat Probe, maximum working time limit (10
hours) has been exceeded.
hours) has been exceeded.
No problem (endless cooking is prevented)
No problem (endless cooking is prevented)
Electonic board may be defect
Electonic board may be defect
ELECTRICAL CONNECTION DIAGRAM:
ELECTRICAL CONNECTION DIAGRAM:
7
7
36
Error Cod
Er1
Error Code
Er1
Er2
Er3
Er2
Er3
Er4
Er4
Er5
Er5