Pyramis ecoline Installations- Und Gebrauchsanleitung Seite 35

SELECTING A COOKING FUNCTION
Turn the Cooking function selector to the position, until the desired cooking function is displayed
on the Cooking Function Displayed.
The default cooking temperature assigned to the selected function will appear on the Temperature
display (Note: For some functions like lamp and defrost where a temperature control is not possible
and the temperature display is blank). The
position.
ADJUSTING TIME OF DAY
Time of day can be adjusted when automatic cooking is not in progress. Push and hold the
navigator knob for 3 seconds until
three times until symbol starts flashing, set the correct time by turning the knob left to decrease or
right to increase. After a few seconds screen will stabilize, flashing will stop, adjustment is completed.
MINUTE MINDER (ALARM)
This function is a minute minder alarm independent of oven control. Push and hold the navigator
knob for 3 seconds until
until symbol starts flashing, set the desired minute minder duration by turning the knob left to
decrease or right to increase. The maximum allowed setting is 23 hours 59 minutes. After a few
seconds screen will stabilize, flashing will stop, adjustment is completed. After the programmed
duration is elapsed the buzzer will sound,
navigator. The Alarm sound will stop after 7 minutes if no pushing or turning the navigator, whereas
the flashing symbol will be present until pushing or turning navigator probe.
Optional feature of the function.
is steady on the timer display except the 0 (off)
symbol starts flashing. Push and release the navigator knob
symbol start flashing. Push and release the navigator knob two times
will flash and can be reset by pushing or turning the
4
33