When The Oven Is First Installed - Pyramis ecoline Installations- Und Gebrauchsanleitung

 Connection must comply with national regulations.
 The oven must be positioned for that easy access to wall outlet or a duble pole switch
for electrical connection.
 Do not position the Power supply cord to contact hot surfaces.
 When the Power supply cord is damaged, consult your nearest authorized service
location, and Table 1, provide to change with the appropriate to feature of original
spare parts.
 If the device is connected directly to the device with the electrical wiring system shall
be installed between the two poles of a circuit breaker and the earthing cable must
not be interrupted by a two-pole circuit breaker.
 The adapters, multiple sockets or extension cords are not recommended for use.
In accordance with applicable safety laws must be necessary to use an adapter or
extension cord. However, certainly for the adapter and power should not exceed the
specified maximum current capacity.
 After the connection is finished, be sure to test the heating elements up to 3 minutes.
 The electrical safety of the appliance can only be guaranteed when it has been
correctly connected to an efficient earthed power supply, as laid down in the
regulations for electrical safety. The manufacturer can not be held responsible for any
damage to persons, animals or things due to the lack of an earth connection.

WHEN THE OVEN IS FIRST INSTALLED

Remove all the baking trays and oven racks.

Set the 'Heat Setting' to maximum level.

Function button in the upper and lower heating (if you have the fan) turn the function.

Turn the oven for 30 minutes in this way.

During this time, elements from the oven and heat insulating material and a smell of

smoke may occur only once. If such a situation occurs, before you put food in the oven
justwaiting to be no odor and smoke.
Repeat this process in the grid element.

These processes inside the oven when slightly damp cloth and wipe clean with a

softcloth.
Figure 5
9