Setting The Stroke Rate; Adjusting The Pendulum Stroke; Switching On/Off; Battery Charge Level - Parkside PSTKA 12 A2 Originalbetriebsanleitung

Setting the stroke rate

♦ Use the stroke rate adjusting wheel
required stroke rate.

Adjusting the pendulum stroke

♦ You can use the pendulum stroke switch
adjust the pendular movement of the saw blade
. You can achieve fine, clean-cut edges with-
out pendulum movement (setting "0"). Switch
off pendulum movement when working on thin
workpieces. You can achieve an increasingly
fast work rate if the pendulum stroke is activated
(settings 1–2).
Switching on/off
Switching the appliance on:
Move the ON/OFF switch
The LED working light
LED light up.
Switching the appliance off:
Move the ON/OFF switch
The LED working light
LED go out.

Battery charge level

♦ The status will be shown on the battery display
LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery

Maintenance and cleaning

WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery pack before carrying out
any work on the appliance.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Use a soft, dry cloth to clean the housing.
■ Replace the saw blade
are too blunt for adequate sawing.
■ Clean the appliance after completing your
sawing work.
PSTKA 12 A2
to set the
to
into the "I" position.
and the battery display
into the "0" position.
and the battery display
as soon as its teeth
■ Remove any dirt (e.g. sawdust). Clean the saw
blade holder and the extraction nozzle
necessary, with a brush or by blowing it out
with compressed air.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Replacement parts not listed (such as batter-
ies, battery charger) can be ordered via our
service hotline.
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase. If this product has any faults,
you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the
warranty described below.
Warranty conditions
The warranty period starts on the date of purchase.
Please keep your receipt in a safe place. This will
be required as proof of purchase.
If any material or manufacturing fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
or refund the purchase price (at our discretion).
This warranty service requires that you present the
defective appliance and the proof of purchase (re-
ceipt) within the three-year warranty period, along
with a brief written description of the fault and of
when it occurred.
If the defect is covered by the warranty, your prod-
uct will either be repaired or replaced by us. The
repair or replacement of a product does not signify
the beginning of a new warranty period.
, if
GB │ IE │
27 ■