Herunterladen Inhalt Inhalt Diese Seite drucken

Practical Tips; Scrubbing Wheels; Grinding With A Wire Brush; Cutting Disc - Parkside PWS 125 D3 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PWS 125 D3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

Practical tips

When selecting the tool,
ensure that its specified per-
missible rotation speed is at
least as high as the maxi-
mum rotation speed speci-
fied on the angle grinder.
When selecting the disc, pay
attention to the maximum per-
missible diameter and the ma-
ximum permissible thickness.
Pay attention to the thread
size M14 when selecting the
brush.

Scrubbing wheels

Never use a cutting wheel
for scrubbing !
The device must only be
operated with the protecti-
ve hood mounted when the
rough grinding wheel is used.
Exert only moderate pressure on the work-
piece. Move the device evenly back and
forth.
A working angle of 30° to 40° achieves
the best results for scrub grinding.
Grinding with a wire
brush
Ensure that you observe the
permissible speed when se-
lecting the wire brush. The
permissible rotation speed
of the wire brush must be at
least as high as the highest
rotation speed indicated on
the angle grinder.
Wear protective goggles: wires
may become released!
Suitable for rough rust removal, cleaning
weld seams and removing paint.
Press the wire brush with medium force
onto the workpiece to be processed.
Do not exert excessive strain on the wire
brush by pressing down too hard.

Cutting disc

Never use a scrubbing wheel
for cutting !
The device must only be
operated with the protective
hood mounted when the cut-
ting disc is used.
Only certified, fibre-reinforced cutting or
grinding discs may be used.
In general, work with small scrubs. Exert
only moderate pressure on the workpiece.
Always work in the counter-direction. This
ensures that the device is not pushed out of
the cut through lack of control.

Assembly

Caution! Risk of injury!
- Ensure that you have sufficient
space in which to work, and that
you do not endanger other peo-
ple.
- All hoods and protective devices
must be assembled properly be-
fore commissioning.
- Disconnect the mains plug be-
fore changing the setting on the
device
GB
IE
3 5

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis