Connecting/Removing/ Emptying The Dust Collection Box; How To Connect/Remove; Dust Extraction; Practical Tips - Parkside PHS 160 D4 Originalbetriebsanleitung

GB MT
Removing sanding sheet
2. Simply pull the sanding sheet
(12) off the sanding plate (10).
Connecting/removing/emp-
tying the dust collection box
Connecting the dust collec-
tion box:
1. Before connecting, ensure that
the dust collection box (8) is
firmly closed.
2. Slide the dust collection box (8)
all the way onto the connection
for dust extraction (9). The two
lugs (9a) on the connection for
dust extraction (9) fit into the two
grooves (8a) of the dust collec-
tion box (8).
Removing the dust collec-
tion box:
3. Press the release button (4) and
pull the dust collection box (8)
out.
Emptying the dust collec-
tion box:
4. Pull the tab (7) and remove the
dust collection box lid (6).
5. To empty, simply shake or knock
out the dust collection box (8).
6. Then close the dust collection
box (8) again.
Empty the dust collection box regu-
larly to ensure optimal suction.
38

How to connect/remove

dust extraction

Connecting external dust
extraction
1. Push the external dust extraction
adaptor (11) as far as it will go
on the dust extraction connector
(9).
2. Connect the extraction hose from
a vacuum cleaner (sold separate-
ly) to the external dust extraction
adaptor (11).
Removing external dust
extraction
1. Remove the extraction hose from
the external dust extraction ad-
aptor (11).
2. Disconnect the adapter for exter-
nal dust extraction (11).
Do not use the tool without
the dust box fitted or external
dust extraction.
If necessary, you can connect the
suction tube of a vacuum cleaner
directly to the device without an
adapter.

Practical tips

When working with the ap-
pliance, always wear suita-
ble clothing and appropriate
protective equipment.
Prior to each use it must be
ensured that the appliance is
working correctly.
Personal protective equip-
ment and a fully functional
appliance reduce the risk of
injuries and accidents.