Promise Technology VessRAID 1000f Serie Kurzanleitung Seite 39

Making Automatic IP Settings
To make Management Port settings automatically:
1. Press the
2. Press the
If it says Link Status Down , reconnect to the network before preceding.
3. Press the
4. Press the
5. Press the
6. Press the
The display shows the new IP address set by the DHCP server.
This completes the Management Port setup.
button until the display says Management Port .
or
button and the display says Link Status Up .
or button and the display says DHCP Disable.
button to make a change.
button to Enable.
button to confirm.
Task 8: Setting the IP Address
39