Promise Technology VessRAID 1000f Serie Kurzanleitung Seite 23

Configuring a Management Path
VessRAID controller has one (1) Ethernet RJ-45 Management Port connector.
See page 21, Figure 18.
To establish the management path:
1. Attach one end of an Ethernet cable to the standard NIC in the Host PC.
Attach the other end of the Ethernet cable to one of the ports on the standard
network switch. See page 24, Figure 20.
2. Attach one end of an Ethernet cable to one of the ports on the standard
network switch.
Attach the other end of the Ethernet cable to the Management Port on the
VessRAID subsystem. See Figure 20.
If you have multiple VessRAID subsystems, Host PCs or Servers, repeat
steps 1 and 2 as required.
Task 5: Making Data and Management Connections
23