Additional Safety Notices - Parkside PDRS 27 A1 Originalbetriebsanleitung

■ If universal rotary joints (claw couplings) are used, locking pins
must be inserted and Whipcheck hose restraints must be used to
provide protection in the case of a failure of the connection be-
tween the hose and the machine.
■ Ensure that the maximum permissible pressure on the machine is
not exceeded.
■ For torque-controlled machines with continuous rotation, the air
pressure has effects on performance that are relevant in terms of
safety.
Requirements for the length and diameter of the hose must there-
fore be defined.
■ Never carry pneumatic machines by the hose.

Additional safety notices

■ If applicable, observe special work safety or accident prevention
regulations for the handling of compressors and compressed air
tools.
■ Ensure that the maximum permissible working pressure specified
in the Technical Data is not exceeded.
■ Do not overload this tool – use this tool only within the capacity
range specified in the Technical Data.
■ Use safe lubricants. Ensure sufficient ventilation at the place of
work. In case of increased discharge:
check the compressed air tool and have it repaired if necessary.
■ Do not use this tool if you are distracted. Be alert, watch what
you are doing and use common sense when operating a com-
pressed air tool. Do not use tools when you feel tired or are
under influence of drugs, alcohol, or medication. A moment of
inattention when operating the tool can result in serious personal
injuries.
│ GB │ MT
■ 84
PDRS 27 A1